Articles
Potentiometric stripping analysis
Potentiometric stripping analysis is a sensitive analytical technique. Before the SCP measurement starts a deposition stage at the deposition potential E dep is required. After th...
Chrono methods high speed (∆t > 100 ns)
Chrono methods high speed (∆t > 100 ns) is a form of amperometric detection with very high sampling rates or respectively very short interval times. At PalmSens is is better k...
Chrono methods (∆t > 1 ms)
Chrono methods (∆t > 1 ms) or Amperiometric Detection is a simple, widely used electrochemical measurement technique. At PalmSens it is better known under the name Chronoamper...
BiPotentiostat
A BiPotentiostat is a potentiostat with two working electrodes. One electrode is the counter electrode and the other is the reference electrode. The two working electrodes can be operated and monitored exactly simultaneously. A Bipotentiostat is sometimes called a BiPot.
Square Wave Voltammetry (SWV)
Square Wave Voltammetry (SWW) is in fact a special version of Differential Pulse Voltammerty (DPV). Differential Pulse Voltammerty is Square Wave Voltammetry when t pulse is equal ...
Integrated Graphene IG-GII-SENS-01 description
PSExampleApp: Configurable and Open-Source App for Sensor Applications
The PSExampleApp is a simple open-source application that guides a user to do a measurement with a PalmSens device to measure concentrations in a liquid sample. The app can be re-configured without code for use with (bio)sensors measuring a specific analyte using a linear calibration curve.. This file contains the example configuration files to customize the app and links to both the Android and iOS version of the app.
Six factors to consider before buying a potentiostat
An electrochemist typically spends many months together with a potentiostat to get research done. The potentiostat’s performance should not limit the results and the software sho...
Enable low-power features on the EmStat Pico module
The EmStat Pico module is a versatile potentiostat module. With its low-power features enabled, it uses only 10 uA while not measuring, for use in battery operated systems. This gu...
EmStat Pico communication protocol v1.3
This document describes the “online” communication protocol of the EmStat Pico. Initial communication with an EmStat Pico is always done using this online communication. Measurements and other scripts can be started by sending a MethodSCRIPT,
Comparison of Graphene sensors by Integrated Graphene
An Introductory Comparison of Premium Commercially Available Electrode Performance by Integrated Graphene
The equations behind the potentiostat
This article explains the working of a potentiostat more in depth, using Faraday’s law and the Nernst equation. For the basics of the potentiostat, please read the potentiost...
MethodSCRIPT in action: introduction, demonstration and Q&A session
As an OEM supplier, PalmSens is aware of how important your own software is. We support our customers with several Software Development Kits (SDK), which make writing your own sof...
Developing your own electrochemical sensor and reader
Electrochemistry has a wide range of applications. Measuring heavy metal pollution in water, or taking a point-of-care test at your doctor and receiving the results within minutes ...
Multi-channel potentiostat
Do you want to perform several electrochemical measurements simultaneously? Then you need a multi-channel potentiostat. A multichannel potentiostat allows you to perform multiple experiments at the same time.
MultiTrace – PC Software for all Multi-channel instruments
The MultiTrace software controls the individual channels of our multi-channel instruments. You can also combine multiple single-channel instruments.
MUX8-R2 Connector Card
This connector card gives you an overview of the MUX8-R2 connector pin-outs.